CC1610 CO₂ Laser Cutting Machine
CO₂ laser machine for cutting and engraving wood,
acrylic, leather, MDF, and other non-metal materials.
A practical solution for signage, advertising, crafts,
and custom production.
CC1610 CO₂ Laser Cutting and engraving Machine
1600 × 1000 mm working area for efficient cutting and engraving of non-metal materials.
Working Area
1600x1000mm
900x600mm Optional
1300×900 mm Optional
Laser Power
60–180W Optional
Laser Type
CO₂ Laser
Application
Cutting and engraving Non-Metal Materials
What Application / Uses it can make
Real Cutting results
KEY FEATURES
Industrial Mechanical Structure
Solid
Reliable Motion System
Stable movement for consistent cutting performance.
Industrial Cooling
Stable temperature control during extended operation.
Safety Interlock
Compliance with Europe and USA safety standard
Exhaust
Rail
Controller
Cooling
| Item | Standard |
|---|---|
| Working Area | 1600 × 1000 mm,Other options are 900x600mm,1300x900mm |
| Laser Source | Sealed CO₂ Glass Laser Tube, Optional Laser brands are RECI,YONGLI,EFR |
| Laser Power | 80W / 100W / 130W / 150W / 180W* |
| Control System | Ruida RDC6445G,RDC8445S Optional |
| Drive System | Stepper Motor |
| Guide Rail | Linear Guide Rails |
| Working Table | Knife Strip Table,Honeycomb bed,Lifting table |
| Cooling System | Industrial Water Chiller |
| Air Assist | Air Compressor |
| Exhaust | Exhaust Fan |
| Positioning | Red Dot Pointer |
| Safety | Water Flow Protection + Door Interlock |
| Communication | USB / Ethernet |
- Auto Focus
- Rotary Attachment
- CCD Camera System
- Servo Motor Drive
| Technical Parameter | Specification |
|---|---|
| Model | SHARX CC1610 |
| Working Area | 1600 × 1000 mm |
| Laser Type | CO₂ |
| Laser Wavelength | 10.6 μm |
| Laser Power | 80W / 100W / 130W / 150W / 180W |
| Maximum Engraving Speed | 1000 mm/s* |
| Maximum Cutting Speed | 600 mm/s* |
| Positioning Accuracy | ≤ ±0.01 mm* |
| Resolution | 0.01 mm* |
| Minimum Character Size | 1 × 1 mm* |
| Drive System | Stepper Motor |
| Transmission | Belt Drive |
| Guide Rail | Linear Guide Rails |
| Control System | Ruida |
| Cooling System | Water Cooling |
| Working Voltage | AC 220V ±10%, 50/60Hz,110v is optional |
| Operating Temperature | 0–45°C |
| Operating Humidity | 5–95%, non-condensing |
| Supported Formats | AI, DXF, PLT, BMP, JPG, PNG, DST, etc. |
FROM CHINA TO YOUR WORKSHOP
Packaging → Shipping → Delivery
Shipping
Sea freight
LCL / FCL
DAP / DDP available
Warranty
12-24 months warranty
Parts coverage
Warranty terms
Support
Remote installation
Training
Troubleshooting
Spare parts
FAQ
01. What materials can this laser machine cut and engrave?
Answer：
This CO₂ laser is designed for cutting and engraving a wide range of non-metal materials, including:
- Wood and plywood
- MDF
- Acrylic / PMMA
- Leather
- Fabric and textiles
- Paper and cardboard
- Rubber
- Foam
- Plastic sheets
- Bamboo
- Some coated materials
- Glass and coated stone for engraving
The actual result depends on the material type, thickness, laser power and processing settings.
CO₂ lasers operate at a wavelength of 10.6 μm, which is particularly suitable for many non-metal materials such as wood, acrylic, leather and fabric.
02. How thick can the machine cut?
Answer：
The maximum cutting thickness depends on the material, laser power and required edge quality.
For example, higher-power configurations can be used for thicker acrylic, plywood and MDF, while lower-power configurations are better suited to engraving and thinner materials.
For a specific material and thickness, we recommend testing your actual material before purchase. We can also perform a cutting test and provide photos or videos of the result.
Tell us your material and thickness. We can test it for you.
03. How do I choose the right laser power?
Answer：
Laser power should be selected according to your material, thickness and production requirements.
As a general guideline:
- 60–80W: engraving and light cutting
- 90–100W: general engraving and cutting
- 130–150W: heavier cutting and higher production requirements
- 180W+: thicker materials and demanding production applications
Higher power does not automatically mean better engraving. The correct power depends on the material and the required processing result.
If you tell us your material + thickness + working size, we can recommend a suitable configuration.
04. Can you test my material before I buy?
Answer：
Yes. You can send us your material, material thickness and cutting or engraving file.
We can test the material based on your requirements and provide photos or videos of the processing result.
For applications where cutting quality is particularly important, we recommend testing your actual material before confirming the machine configuration.
05. Can I see the machine working before I buy?
Answer：
Yes. We can arrange a scheduled live machine demonstration.
During the demonstration, we can show the machine, working area, control system, laser processing and test samples.
If you provide your material or a cutting file in advance, we can also arrange a test based on your application requirements.
06. Can I use LightBurn with the machine?
Answer：
Yes. Our Ruida-based configuration is compatible with LightBurn. LightBurn can be used to prepare and control cutting and engraving jobs, including speed, power, passes and other processing settings. The exact controller and software configuration will be confirmed before shipment.
07. What is included with the laser machine?
Answer：
The standard configuration includes the main machine and the essential components required for operation.
Depending on the model and configuration, this may include the laser source or tube, laser head, controller, cooling system, air-assist system, exhaust system and working table.
The exact configuration, accessories and optional equipment will be clearly listed in your quotation before order confirmation.
08. Can I customize the machine configuration?
Answer：
Yes. Machine configurations can be adjusted according to your application.
Depending on the model, options may include laser power, working table, autofocus, rotary attachment, cooling system, exhaust system, camera system and other application-specific components.
We recommend selecting options according to your actual materials and production requirements rather than adding unnecessary equipment.
09. What electrical power does the machine require?
Answer：
The required electrical configuration depends on the machine model, laser power and destination country.
Common configurations may include 220V/50Hz or 110v/220V/60Hz, while other electrical configurations may be available depending on the machine.
We confirm the required voltage, frequency and electrical configuration with you before production and shipment.
10. How much space do I need for the machine?
Answer：
The required installation space depends on the machine’s external dimensions and configuration.
In addition to the machine itself, you should allow sufficient space for material loading, unloading, exhaust connections, electrical connections, cooling equipment and routine maintenance.
We can provide the machine dimensions and installation requirements before shipment so you can prepare the workspace in advance.
11.How is the machine shipped?
Answer：
We can arrange international shipping according to your destination and requirements.
Depending on the machine size, destination and shipping method, options may include LCL or full-container sea freight,DDU,DDP Shipping.
We can provide the packing dimensions, gross weight and shipping information and help arrange a suitable logistics solution.
Shipping costs depend on the destination, shipment size and selected shipping method.
12. Do you provide the documents needed for customs clearance?
Answer：
Yes. We can provide the standard export and shipping documents required for the shipment, such as the commercial invoice, packing list and bill of lading.
Additional documents may be required depending on the destination country and local import regulations.
We can cooperate with your customs broker or freight forwarder and provide the available documents required for the shipment.
13. Are customs duties, VAT/GST and local charges included?
Answer：
Import duties, VAT/GST, customs clearance fees and other destination-side charges depend on the destination country and shipping arrangement.
Unless specifically stated in the quotation, destination-side import costs are normally not included in the machine price.
We can provide a shipping and logistics quotation based on your destination so you can estimate the total landed cost more accurately.
DDP shipping includes all fees and duties,We can check if give us the address.
14. Can you arrange customs clearance and delivery to my address?
Answer：
Depending on the destination and available logistics services, we can help arrange shipping and delivery solutions beyond the main port.
The available service may include international freight, destination handling, customs clearance and final delivery.
The exact service scope and cost depend on the destination country, delivery address and agreed shipping terms and will be confirmed in the quotation.
15.How is the machine installed after delivery?
Answer：
The machine is tested before shipment.
Depending on the machine model and shipping configuration, some components may need to be installed or connected after delivery.
We provide installation instructions, setup guidance and remote technical support to help you get the machine running.
We recommend preparing the required electrical power, ventilation, exhaust and installation space before the machine arrives.
16.What warranty do you provide?
Answer：
We provide warranty coverage according to the specific machine configuration and quotation.
The warranty normally covers manufacturing defects under normal operation. Consumable parts and damage caused by improper operation, incorrect maintenance or external factors may not be covered.
The exact warranty terms and coverage will be confirmed in the quotation and sales contract before purchase.
17. Do you provide technical support after delivery?
Answer：
Yes. We provide remote technical support after delivery.
Support may include machine setup, software configuration, parameter adjustment, troubleshooting and maintenance guidance.
If a problem occurs, you can send us photos, videos or other relevant information so our team can help identify the cause and provide practical troubleshooting guidance.
18. What happens if a component fails after delivery?
Answer：
If a component requires troubleshooting or replacement, we can help identify the problem remotely and provide the necessary instructions.
Depending on the warranty terms and the cause of the failure, replacement parts may be provided according to the agreed warranty coverage.
We can also provide installation guidance through photos, videos or remote communication when necessary.
19. How much space do I need for the machine?
Answer：
The working area is not the same as the machine’s external dimensions.
You need additional space for:
- Loading and unloading materials
- Exhaust ducting
- Electrical connections
- Water chiller
- Machine maintenance
- Access around the machine
We recommend confirming the machine’s external dimensions and installation layout before shipment.
Not Sure Which Configuration?
Please leave your message, such as: Material │ Thickness │ Size │ Country?